MSDS for Shandong Tianli Pharmaceutical Co.,Ltd Sorbitol Powder

Identification

Product Name: Sorbitol Powder
Manufacturer: Shandong Tianli Pharmaceutical Co., Ltd
Address: No. 1 Tianli Road, Tengzhou City, Shandong Province, China
Emergency Contact: +86-632-5918865
Recommended Use: Ingredient for food, pharmaceuticals, and cosmetic products
Synonyms: Glucitol

Hazard Identification

Classification: Non-hazardous according to GHS
Potential Hazards: May cause respiratory irritation after inhalation of dust, mild irritation to eyes and skin on contact
Label Elements: No symbol, signal word or hazard statement required
Precautionary Statements: Avoid breathing dust, wash hands thoroughly after handling, wear dust mask if necessary
Physical Hazards: Dust may form combustible mixtures in air during handling

Composition / Information on Ingredients

Chemical Name: Sorbitol
CAS Number: 50-70-4
EC Number: 200-061-5
Concentration: ≥ 98% (By weight)
Impurities: Trace sugars and water

First Aid Measures

Inhalation: Move to fresh air, support breathing as required, consult physician if respiratory symptoms develop
Skin Contact: Wash skin thoroughly with soap and water, seek medical advice if irritation persists
Eye Contact: Rinse cautiously with water for several minutes, remove contact lenses if present, continue rinsing, seek medical attention if irritation persists
Ingestion: Rinse mouth with water, drink small quantities of water if conscious, seek medical attention if feeling unwell

Fire-Fighting Measures

Suitable Extinguishing Media: Water spray, dry powder, foam, carbon dioxide
Unsuitable Media: Direct water jet to prevent dust dispersal
Specific Hazards: Dust may ignite in presence of ignition sources
Protection for Fire-Fighters: Self-contained breathing apparatus and full protective gear recommended
Thermal Decomposition Products: Carbon oxides possible on decomposition

Accidental Release Measures

Personal Precautions: Avoid inhalation of dust, wear dust-proof mask, goggles and suitable clothing
Environmental Precautions: Prevent large quantities from entering drains or watercourses
Cleanup Methods: Sweep or vacuum to collect the spilled material, place in suitable container for disposal, ventilate area after cleanup

Handling and Storage

Handling: Minimize dust generation, use in well-ventilated areas, keep away from ignition sources, avoid skin and eye contact
Storage Conditions: Store in tightly sealed containers in a cool, dry, and well-ventilated place, protect from humidity and direct sunlight
Incompatible Materials: Strong oxidizers
Special Precautions: Implement good industrial hygiene practices, keep container tightly closed

Exposure Controls and Personal Protection

Exposure Limits: No relevant limits established for sorbitol by OSHA, ACGIH, or NIOSH
Engineering Controls: Provide local exhaust ventilation to keep airborne levels below nuisance dust limits
Personal Protective Equipment: Dust mask or respirator if dust formation is possible, safety goggles, chemical-resistant gloves
Hygiene Measures: Wash hands after handling, change contaminated clothing promptly

Physical and Chemical Properties

Appearance: White crystalline powder
Odor: Odorless
Odor Threshold: Not applicable
pH: 5.0 - 7.0 (10% solution at 20°C)
Melting Point: 95–100°C
Boiling Point: Decomposes before boiling
Flash Point: Not applicable
Evaporation Rate: Not applicable
Flammability: May support combustion in dust form
Vapor Pressure: Negligible
Bulk Density: 0.7–0.9 g/cm³
Solubility: Very soluble in water
Partition Coefficient (n-octanol/water): -2.2
Auto-ignition Temperature: 420°C

Stability and Reactivity

Chemical Stability: Stable under recommended conditions
Reactivity: Not reactive under normal use
Conditions to Avoid: High humidity, extreme heat, ignition sources, long-term exposure to air
Incompatible Materials: Strong oxidizers, strong acids
Hazardous Decomposition Products: Carbon monoxide, carbon dioxide
Hazardous Polymerization: Will not occur

Toxicological Information

Acute Toxicity: LD50 (oral, rat) > 15,000 mg/kg
Irritation: Slight to none on skin and eye contact
Chronic Effects: No known chronic health effects in humans
Mutagenicity: Not classified as mutagenic
Carcinogenicity: Not listed as carcinogen by IARC, NTP, ACGIH or OSHA
Symptoms: Mild gastrointestinal discomfort may occur if large amounts ingested
Sensitization: Not reported

Ecological Information

Ecotoxicity: Not classified as harmful to aquatic life, low bioaccumulation potential
Mobility in Soil: High due to water solubility
Persistence and Degradability: Readily biodegradable in the environment
Bioaccumulative Potential: Does not bioaccumulate
Other Adverse Effects: No known significant effects or critical hazards reported

Disposal Considerations

Disposal Methods: Dispose as non-hazardous waste according to local, regional and national regulations
Unused Product: Reuse if possible, otherwise deliver to approved waste disposal company
Contaminated Packaging: Rinse and recycle or dispose as required by local guidelines

Transport Information

UN Number: Not regulated
Proper Shipping Name: Sorbitol
Transport Hazard Class: Not classified as dangerous for transport
Packing Group: Not assigned
Marine Pollutant: No
Special Precautions: Protect from moisture and breakage during transport

Regulatory Information

International Inventories: Listed on EINECS, DSL, TSCA inventory
Regulatory Status: Food additive (FAO/WHO), Generally Recognized as Safe (GRAS) by US FDA
SARA Title III: Not subject to reporting requirements
REACH Status: Substance registered from non-EU manufacturer
Other Regulations: No restrictions noted for cosmetic, food, or pharmaceutical use under current legislation